One such issue is that Insignia TV is not turning on out of the blue. When it happens, the remote gets the most brutal treatment, but there could also be other reasons. We’ll discuss all the probable causes for your Fire TV not powering up and the methods to make it work again. Let’s dive into the post.
Reasons Why Your Insignia TV Won’t Turn On
Here are a few reasons why the TV fails to start like it used to:
Incorrect cable connections. Faulty power outlet. Weak or dead remote batteries. Non-functioning remote or power button. Malfunctioning TV mainboard. Wrong TV input selection.
5 Methods to Fix the Insignia TV Not Powering On Problem
Try the following methods to troubleshoot your Insignia TV and fix the power problem.
1. Check Physical Connections and Power Supply
Firstly, you must check whether all connecting cables are plugged in properly. It includes the main power cable to the TV and wall outlet. Remove the TV connection from the wall socket if tightening the wires doesn’t have an effect. Try another electrical device in the same wall socket to confirm whether electricity passes through it. Also, connect the Insignia TV to a different wall socket and check whether the TV power light is active. If you use a spike strip, a blown fuse can prevent current from passing to the TV. Replace the blown fuse, remove the spike strip, and directly connect the TV to the wall socket.
2. Check The Remote
Dead remote batteries cannot power on the TV. Change them and ensure a clear line of sight between the TV and the remote. Also, check if the power button on the remote isn’t damaged. You can use the manual power button on the TV to power it on if the remote doesn’t work. Press it once to turn on the TV and check whether the remote’s power or other buttons work. Replace the remote if the faulty power button is the reason behind the black or empty screen on Insignia TV. You can even use Insignia TV without the remote in the meantime.
3. Check The Input Source
You’ll see a blank screen if you accidentally pick an incorrect input option, like a vacant HDMI port or any other port that doesn’t have a device connected. It can sometimes give the illusion of the TV not powering on. So, you must pick the correct input source. You can do it by pressing the input button on the TV, selecting the correct HDMI option, or pressing the physical button to change the Input.
4. Do a Power Reset
If you cannot change the input source, do a power reset instead. Disconnect the Insignia Fire TV from the wall socket and press and hold the power button for 60 seconds. After that, wait a few minutes and reconnect the power cord to a wall socket. Check if the TV’s LED indicator turns on and the screen starts and opens the selected input source.
5. Call a Technician
If you cannot force the TV to start even after the above methods, it’s likely a hardware problem and out of your expertise. It could be a very small fuse, capacitor shorting, or a serious one that might need the complete mainboard replacement. Reach out to the Insignia support team and schedule a technician visit. If the TV is under warranty, you won’t have to spend much on it. Wrapping Up These were the five methods to fix the “Insignia TV not powering on” problem. Thoroughly inspect the cable connections, power outlet, and remote. Check the input source and do a power reset. If the TV is still not turning on, call a technician.
How to Use Insignia Fire TV as an Extended Monitor [Wired and Wireless Methods] How to Turn Off Closed Captions on Insignia TV [All Models] Does Insignia TV Have Bluetooth? How to Connect Bluetooth Devices to Insignia TV How to use your Smartphone as Insignia TV Remote How to Connect Insignia Soundbar to TV 3 Ways to Change Input on Insignia TV without Remote Insignia 3 in 1 Universal Remote Codes and Program Guide
